Skip to main content
Technician pressure washing the siding of a two-story home, foundation shrubs covered in plastic sheeting below the spray

Decks & Fences

Deck and wood fence washing sized to what the wood can take, followed by a sealant that keeps gray-out from coming right back.

Bare wood left outdoors turns gray because UV breaks down the surface fibers, and that grayed layer then holds moisture instead of shedding it — which is what lets mildew and algae take hold in the grain. The fix looks simple: wash it off. The part that goes wrong is the pressure used to do it.

Wood is soft and fibrous compared to the surfaces a pressure washer is usually pointed at. Too much force does not just clean the surface, it lifts and separates the wood fibers themselves, a permanent effect called furring that no amount of sanding fully reverses. We wash decks and fences at a pressure the wood can actually tolerate, and finish with a sealant so the graying process has to start over from bare wood again.

Why it matters

  • Pressure matched to the wood

    Enough force to lift dirt and mildew, not enough to fur the grain — the two require different settings, and we use the right one.

  • Restores the wood underneath

    What washes off is the grayed, UV-damaged surface layer, revealing the sound wood grain that was underneath it the whole time.

  • Seals it before the cycle restarts

    A penetrating sealant applied after washing slows the UV damage that caused the graying in the first place.

  • Full dry-down before sealing

    Sealant applied over damp wood traps moisture underneath it — we let the wood dry fully before it goes on.

How it works

What to expect, step by step

  1. Assess the wood

    We check for soft spots, loose boards and existing finish before deciding on pressure and detergent.

  2. Apply a wood-safe cleaner

    A cleaning solution breaks down mildew and grayed fibers so the wash itself needs less force to lift them.

  3. Wash at low pressure

    A wide-fan tip and pressure set for wood clears the loosened buildup without furring the grain.

  4. Seal once dry

    After a full dry-down period, a penetrating sealant goes on to slow the next graying cycle.

Why homeowners call us back

The parts of home services people usually dread — fixed

  • No hidden fees

    The number we quote is the number on your invoice. No trip charges, no fuel surcharges.

  • Upfront pricing

    Published rates where the work is standard, a firm on-site number where it isn't — either way, you know the cost before we start.

  • Licensed & insured

    Fully covered crews, background-checked technicians and documented inspections.

  • On-time arrival

    Two-hour appointment windows with a text when the technician is on the way.

Upfront pricing

Know the cost before we start

Deck

Deck pricing
ServicePrice
Up to 200 sq ft$149
Up to 300 sq ft$199
Up to 400 sq ft$249
Up to 500 sq ft$299
Each additional 100 sq ft$50

Fence

Fence pricing
ServicePrice
Up to 100 linear ft$199
Up to 200 linear ft$299
Up to 300 linear ft$399
Up to 400 linear ft$499
Each additional 100 linear ft$599

Final pricing is confirmed on site before any work begins.

Common questions

Answers before you call

Ready to book your decks & fences service?

Tell us what your home needs and we'll give you a real number — usually the same day.

Call NowGet a Quote