Skip to main content
Technician on a step ladder brushing a ceiling air duct, a vacuum hose running down to a unit on the floor

Dryer Vent Repairs and Install

Rigid duct replacing crushed flexible transitions, plus new vent runs done to code. Repairs that actually fix the airflow problem.

The thin aluminum flex duct that connects most dryers to the wall is the single most common failure point in the whole system. Push the machine back into place and it kinks or gets crushed against the wall, and every ridge in that crushed section catches lint that a straight run would carry through. Rigid metal duct does not collapse the same way, which is why it is the correct material for a permanent run, not just the transition.

Some problems are not about the material at all. A run that is too long or has too many turns needs a booster fan to keep exhaust moving, and an exterior damper that has rusted or bent shut can trap heat and moisture in the wall regardless of how clean the duct itself is.

Why it matters

  • Replaces crushed transitions

    Rigid duct swaps out for kinked flexible aluminum that traps lint at every crushed ridge behind the machine.

  • Sizes runs correctly

    Long or high-turn runs get a booster fan so exhaust keeps moving instead of stalling partway through the duct.

  • Fixes stuck exterior dampers

    A rusted or bent damper that will not open traps heat and moisture in the wall no matter how clean the duct is.

How it works

What to expect, step by step

  1. Inspect the existing run

    We check the transition duct, the wall penetration and the exterior termination for the actual failure point.

  2. Replace flex with rigid

    Crushed or kinked flexible aluminum is swapped for rigid metal duct rated for permanent installation.

  3. Correct the run length

    Long runs or ones with several turns get a booster fan sized to keep exhaust velocity where it needs to be.

  4. Confirm the damper

    The exterior damper is tested to open freely under airflow and seal shut when the dryer is off.

Why homeowners call us back

The parts of home services people usually dread — fixed

  • No hidden fees

    The number we quote is the number on your invoice. No trip charges, no fuel surcharges.

  • Upfront pricing

    Published rates where the work is standard, a firm on-site number where it isn't — either way, you know the cost before we start.

  • Licensed & insured

    Fully covered crews, background-checked technicians and documented inspections.

  • On-time arrival

    Two-hour appointment windows with a text when the technician is on the way.

Free estimate

Every Dryer Vent Repairs and Install job is quoted on site

The scope of this job varies too much from house to house for a price list to be honest. That's why we walk the site first — the estimate is free, and the number we give you is locked in before any work begins.

Common questions

Answers before you call

Ready to book your dryer vent repairs and install service?

Tell us what your home needs and we'll give you a real number — usually the same day.

Call NowGet a Quote