Skip to main content
Technician pressure washing the siding of a two-story home, foundation shrubs covered in plastic sheeting below the spray

Concrete Power Washing

Driveway and walkway cleaning that pairs a detergent dwell with real pressure — enough to lift oil and rust stains concrete has absorbed, not just surface dirt.

Concrete is porous, which is why it holds stains that a hosing-off never touches. Oil from a parked car and rust from a planter or patio furniture leg do not sit on the surface — they soak into the pore structure of the slab, which is why pressure alone, no matter how strong, does not lift them back out. A detergent formulated to break the stain down has to dwell on the surface first; the pressure washing that follows is what rinses the loosened residue away.

Algae on a driveway or walkway is not only a look — a shaded, damp section of concrete grows a biofilm that turns slick underfoot, and that is a fall risk on a walkway people use daily. Concrete's density also means it tolerates far more pressure than the wood or vinyl on the rest of a property, so a driveway gets washed at a setting a deck never would.

Why it matters

  • Detergent dwell before pressure

    Oil and rust are absorbed into the concrete, not sitting on it — a cleaning solution has to break them down before rinsing lifts them out.

  • Full pressure the surface can take

    Dense, non-porous-surfaced concrete tolerates pressure that would fur wood or drive water behind vinyl, so we can clean it thoroughly in one pass.

  • Clears the slip hazard, not just the stain

    Algae film on a shaded walkway or step is slick underfoot — removing it is a safety fix as much as a cosmetic one.

How it works

What to expect, step by step

  1. Identify the stains

    Oil, rust and algae each need a different approach — we check the surface before choosing a detergent.

  2. Apply and dwell

    A cleaning solution sits on absorbed stains long enough to break down what pressure alone cannot lift.

  3. Power wash the surface

    Full pressure the concrete can tolerate rinses the loosened stain and algae away without damaging the slab.

  4. Check the edges and joints

    Expansion joints and edges along grass or mulch beds get a pass to clear buildup a straight sweep misses.

Why homeowners call us back

The parts of home services people usually dread — fixed

  • No hidden fees

    The number we quote is the number on your invoice. No trip charges, no fuel surcharges.

  • Upfront pricing

    Published rates where the work is standard, a firm on-site number where it isn't — either way, you know the cost before we start.

  • Licensed & insured

    Fully covered crews, background-checked technicians and documented inspections.

  • On-time arrival

    Two-hour appointment windows with a text when the technician is on the way.

Upfront pricing

Know the cost before we start

Concrete Power Washing

Concrete Power Washing pricing
ServicePrice
Up to 1,000 sq ft$149
Up to 1,500 sq ft$219
Up to 2,000 sq ft$289
Up to 2,500 sq ft$339
Each additional 500 sq ft$50

Final pricing is confirmed on site before any work begins.

Common questions

Answers before you call

Ready to book your concrete power washing service?

Tell us what your home needs and we'll give you a real number — usually the same day.

Call NowGet a Quote